S1 PRO 滚筒适配器（包含圆柱体和停止环），用于30mm 轴

S1 PRO Spool Adapter (Cylinder and Stopper Rings) for 30mm Spindle

2024-01-19 05:40:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This will fit snugly onto the 30mm spindle of the S1 PRO and provides a 55mm cylinder to slot your spools onto. (Note, if your spindle does not rotate then this will not help you. Only use on rotating spindles).

The advantage of fitting this is that your extruder won't need to work as hard to pull the filament off the spool and it will unwind more smoothly without tension building up and releasing, which can be a cause of horizontal lines in your prints.
After hours spent 'tweaking' the printer and seeing no improvement, this instantly made a significant difference, and I hope it can do the same for you.

You'll notice it's not a true round cylinder but is in fact a 20 (ish) sided shape.
That's how it's meant to be. It enables a nice push fit onto the spindle and helps the spool grip onto it so your spindle bearings do what they are meant to (rather than the spool slipping around the adapter)

Print 2 of the rings. These slide over the cylinder with a satisfying 'zip'.
Put one on the rear, then pop the other one on after your spool to prevent it falling off.
(To be honest, I ran several prints without the rings fitted and the spool didn't come off, but just to be safe!)