Flipper零 无线开发板针保护装置
Flipper Zero WFi Devboard Pin Protector for Minimalist Case/Enclosure
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of the Flipper Zero WiFi Devboard Pin Protector by @Capt_Jiggly https://www.thingiverse.com/thing:5966805 for the Flipper Zero Wifi Devboard in the Minimalist Case/Enclosure by @larsch https://www.thingiverse.com/thing:6060554
Thank you both for the nice designs :-)
The differences are besides the adapted size to the smaller case also a notch inside for the black plastic still sticking out at the GPIO pins in this case.
This means that the board sits securely and firmly in the case but can still be removed again without any problems.
ATTENTION:
Only recommended for printing with flexible material like TPU. When printing with inflexible materials such as PLA, PETG or ABS, the board can be permanently damaged when inserted.
Print Settings
- Printer brand:
Creality
- Printer:
CR-6 SE
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:100%
- Filament brand:
Tronxy
- Filament color:
Blue
- Filament material:
TPU 95A
- Notes:
Speed max 50mm/s and Cooling max 50% printed on CR-6SE with cold Glass bed and Klipper over a Sonic Pad connected.
Tags
License
Flipper Zero WFi Devboard Pin Protector for Minimalist Case/Enclosure
by Nerdpfleger is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
HK416 M式铁架手持用配件2023-03-26 -
带有排气设计的小型漏斗模型2023-08-20 -
超旋涡轮机 3D 模型2024-01-18 -
Bosch 电动车电池固定架 / 充电站2024-04-16 -
拳击手套帽2024-05-01
最热下载
-
Nissan S13 Silvia BN 运动装备套件 RC车身 1:10 3件2023-08-23 -
奥迪奥技术卡 ATH-M40x 连轴器2024-03-23 -
Wolf系列手机支架2025-07-16 -
王国之泪TOTK光龙塞尔达传说2024-04-20
最新模型
-
线轴固定架2024-05-08 -
Sunlu FilaDryer S1 Plus气压计安装支架2024-05-08 -
ABS 1.5英寸盖2024-05-08 -
精简设计80mm汽车转速表仪表壳2024-05-06 -
Jenga盒子2024-05-06