Ender 3 V2 Neo风扇罩

Ender 3 V2 Neo Shroud for 4020 fan

2023-08-27 04:43:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I had an issue with the hot end overheating, decided to upgrade to 4020 fan. Was not able to find any shroud that I really liked. Used "original" STL to get tabs positions. Everything else designed from the scratch. Requires 3 threaded inserts M3 x 4 x 5mm (https://www.amazon.com/gp/product/B08NJP5V1M). I used this Winsinn 4020 fan but pretty much any other will work (https://www.amazon.com/gp/product/B07L3CT33J).
On the Ender 3 - print slowly due to a lot of small details. No supports needed. New fan cools really really well - PID recalibration may be needed, silicone sock is really really recommended.
Enjoy!

UPDATE 1
Uploaded new V2 - moved fan 8mm up (better heatsink cooling, less air blows on a heating block, also pushed fan 1mm closer to the front - little bit more space for bolts / washers / wire.