3dsjs

相机三脚架遮阳伞夹具

Camera Tripod Umbrella Clamp

2023-08-27 06:02:49

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

I remixed this camera tripod mount so that I could have a portable method of shade mostly for car shows but also maybe camping. The mount has a couple of screw holes that can use a small bolt and nut (M6 I think?) as a sort of jam nut to retain an umbrella handle and also clamp into a camera tripod.

My thought process on this was a lighter weight and more portable method of shade than a traditional pop-up canopy - the tripod is light and folds up small (should be compatible with most camera tripods) and the umbrella folds up small enough to stow in the storage area of my Delorean. If you are familiar with these cars, you know storage space was an afterthought.

I purchased one of the 80" golf umbrellas to use in this mount:
https://www.amazon.com/Umbrella-Oversize-Windproof-Double-Canopy/dp/B09C7YKL8H/ref=sr_1_3_sspa?crid=8U11NY6HJTTT&keywords=80+inch+umbrella&qid=1693086447&sprefix=80+inch+umbrell%2Caps%2C210&sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

Bear in mind that you will need to weigh down the tripod (I used a 16lb kettlebell) so that a slight breeze does not carry away this gigantic parasol. That said, I have successfully endured two 85°F+ car shows with this now and it has worked perfectly.

I printed this at 100% infill as I was not sure how well the design would hold up over time.

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender 3 Pro

  • Rafts:
    No
  • Supports:
    Yes
  • Infill:
    100
  • Filament brand:

    eSun

  • Filament color:

    Black

  • Filament material:

    PLA+

Tags

License

CC BY

Camera Tripod Umbrella Clamp
by LoveThySpatula is licensed under the Creative Commons - Attribution license.

相机三脚架遮阳伞夹具
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢