安全背心存储容器
Safety vest container
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The safety vest in my car door slot was super annoying and cluttered the car's interior, so I designed a container for it. It fits one or two European and American standard safety vests that are mandatory safety gear in a car (at least here). The container is 10cm wide, 6cm deep, and 23cm high. The infill % doesn't matter because only two tiny areas have infill.
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra
- Rafts:No
- Supports:No
- Resolution:0.3
- Infill:10%
- Filament brand:
PolyTerra
- Filament color:
Light brown
- Filament material:
PLA
- Notes:
I used brim with 0.0mm separation gap just to make sure the edges don't bend while printing.
The cap might not slide on/off perfectly if your printer tolerances are different than mine, the cap is 0.35mm larger than the container itself.
Tags
License
Safety vest container
by maksimelonca is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
2x Philips Hue开关控制面板2023-05-01 -
螺旋式螺丝刀2023-05-04 -
建筑结构模型2023-05-12 -
Hollywood摇臂支撑架2023-05-12 -
SNZB-04户外箱2024-03-20
最热下载
-
GPD Win3 把手型号2023-04-07 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
18650电池存储盒2024-04-18 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
GLOCK 17型手枪2024-05-03
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
育苗盆-连续自动浇水系统（符合欧盟标准的密封水瓶）2025-07-25 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
裸女站立2025-07-16
