HP CryoChamber外置CPU散热器

HP Cryochamber - external cpu radiator

2023-09-06 19:22:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

WORK IN PROGRESS (and thus corrections)

Hey guys, previously I remixed a CPU rad support to take my radiator out of my case, it was at an angle to avoid pushing/pulling hot air to/from the case, today i decided to go full HP Cryochamber, i've designed theese pieces that you can join with screws or something similar.

This is designed for my Cooler Master case (or more or less any case) with top dimensions of 428mm by 230mmn
This design has some support in the upper part for a future Grille that i will install on top of the fans to avoid dust getting in

It has to be flipped upside down to be printed
I've tried to modify most hangouts so you need less support.
You need to print 2 fan ducts, they can be screwed between them, and to the right and left side, (on the upper edge) then the lower edge lies on top of the case

Ideas are welcome, if you want the F360 files i can upload them !