电动茶灯新版本

Lantern (Electric Tea Light) update

2023-09-06 19:24:09

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Made changes to improve the structure of the lantern for electric tea lights so it would hold together better without breaking posts and hinge. Maintain as much of the look as possible with some improvements. Give the appearance of real tea light lantern with the domed heat outlet. Could be more improvements needed. As I was just tinkering with the design.

WARNING: Not for real Tea Lights as most filament is flammable.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1
Rafts:
Doesn't Matter
Supports:
Yes
Notes:
WARNING: Not for real Tea Lights as most filament is flammable.

PINs should be about 95-96%

Same base requirements as https://www.thingiverse.com/thing:6151506 for the parts:
1 x Base_fix
3 x Side
1 x Door_fix
2 x Pin (95-96%)
1 x Top_fix

Do recommend using tree supports from base, top, and door. Worked very well on this design.

9/7/2023 Added the original top with the post holes for the base. Also adjusted the post holes on the new top for a better fit.