电工胶带发射器（Duck Brand 282289 经济版）

Electrical Tape Dispenser (Duck Brand 282289 Economy)

2023-09-06 19:24:34

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This was remixed from UncleFrankSays version to hold a different brand of electrical tape which had a different inner diameter. If you read his comments on the serration, it's really only cosmetic as it doesn't function very well because electrical tape doesn't tear well. What is nice about this, however, is that it gives you a place to hold the tape while pulling it until it snaps. This means that most of the stretch is on the dispensed piece and not back on the roll. If nothing else, the feature allows for you to more quickly pull the next piece rather than letting it stick back on the roll.

Amazon Link: https://www.amazon.com/Duck-282289-Electrical-4-Inch-Single/dp/B007JSGNVQ?ref_=ast_sto_dp&th=1

Let me know if the comments if there's interest for other dimensions. Depending on feedback, I may make the design parametric within Fusion 360.