橡胶气枪改编版

rubberband gattling gun remix

2023-09-07 17:36:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I printed and made this for my kids and they loved it but was difficult to load and keep it together. I used a yoyo string for the crank and rubberbands to hold the barrels and shaft in place like the OG designer did. Modified rubberband arms with retainers so they stay on the cogs better and taller prongs to prevent slippage. Added spacers to go between the end cogs and the mid support. Has pins to stop unwanted turning of the crank and "barrels" when loading or carrying loaded. Picture shows 1 rubberband barrel but 8 are needed.

Print Settings

Printer:
x1c
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.4
Infill:
15 & up
Filament brand:
any
Filament material:
pla+
Notes:
.2 layer height, did 3 layers for everything.
*The end and middle support/spacers I added can be removed and a rubber band used on the end of barrel support like the original design to keep everything together for simplicity if desired

License

CC BY

rubberband gattling gun remix
by BrandiDearien1 is licensed under the Creative Commons - Attribution license.

橡胶气枪改编版

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型