无线控制实用船舶球asting托盘, ESC口和甲板盖(改编自实用船舶)

RC Utility Ship Ballast Caddy, ESC Pocket, and Deck Hatches (Remixed from Utility Ship)

2024-04-30 10:54:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I made my first Utility Ship by Peter a few years ago and loved the build, but wanted to do a second build and added a few mods. Please see summary of mods below in this sets:

The ESC + Ballast caddy's set in the stock RC Utility Ship Cutaway for the Top
The Large hatch is for the rear, above the rudder to allow for servicing. Place marine grease between the hatch and lid for a watertight seal and use caulking to cut a hole and affix the base to the deck.
The Small hatch is for mid-ship, right above the motors to access the motor collars for servicing/replacement. On the OG boat, I stripped a screw and could not get it out.

Thank you to the community for all of the help making this one of the most fun 3D Prints to complete!