镜头和遮挡套件(Sionyx Aurora专用)
Lens and Shade pack for Sionyx Aurora
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is a lens cap anchor that fits snugly without any adhesive, for FDM/filament 3D printers.
Same for the Sun/Moon shade.
Lens cap notch gap may require a small amount of filing to securely fit, may not - prototype did, I adjusted the model by 0.1mm total width of the notch gap, not sure a filament printer can discern difference.
Designed by BFG9001 / BrushFightGenie (Instagram artist username)
Print Settings
- Printer brand:
Creality
- Printer:
Ender 5
- Rafts:No
- Supports:Yes
- Resolution:FDM
- Infill:15% Quarter Cubic
- Filament brand:
Creality
- Filament color:
White
- Filament material:
Hyper PLA
- Notes:
For supports, only lens cover anchor needs it, used concentric lines at 10% for supports
205'C for nozzle
50'C for bed
Lens cap notch may require small amount of filling, wanted it to be tight so it is a manual fit.
License
FDM Lens and Shade STL pack for Sionyx Aurora
by Shizzits is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
精致雪人模型:Yeti Skinny Mini2023-06-03
-
星球大战:绝地武士 3D孟加拉国版权王座2023-09-07
-
Pulsar/ Yukon DSV电池充电器2024-02-04
-
兔肉图表模板2024-05-01
-
MBX5 电池与 ESC 组合托盘2024-05-08
最热下载
-
Gyro Air旋转空气模型2023-03-26
-
开源 1:10 四驱竞技型 RC 车2025-07-08
-
沃帕尔六足行走机器人2023-03-26
-
六棱锥形微小叶片 - 六叶模型2023-03-26
-
俄亥俄州日全食针孔观察器2024-05-03
最新模型
-
Taranis QX7型号运输盖带磁吸支架2024-05-08
-
1/56 比例(约28毫米)戈瑞什小人2024-05-08
-
ZOHD Dart 250电池托盘2024-05-06
-
无蝇防虫网安装支架2024-05-06
-
适用于Acetech Brighter C的枪口消音器2024-05-06