混合半径刻度表 - 打孔设计

Remixed Radius Gauges - Punch some holes

2023-09-08 06:31:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I took the original file and poked some holes in it, in case you want to hang them up or put them together on a string.

Then I poked some more holes in them to reduce mass and filament cost.

Then I broke them up into more separate files if you only need a couple.

All remix mods completed with 3D Builder. No part rebuilt from scratch.

Oh.. and I included a pair of 3mf files (don't print from them) showing how I punched out the holes. You can move the punches around to your hearts content, or change them up however you desire.

Post print note: If your printer creates a crazy nice first layer, consider printing these upside down (numbers facing the bed). Third photo shows what happens. My printer seems to be making a bit of a mess of the top layer. (first two photos). I guess I could have printed in 'quality' mode instead of 'draft'. But this is a tool, not a high detail figurine.