21700电池包持有者容器
Battery Pack holder 21700
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Battery pack holder for either 9 or 10 cells. Could be handy to assist in glueing or welding, to keep the batteries in place and well aligned. Use 2 holders and some rubber bands for double rows. I also included a simple cylinder the size of a 21700 battery, just to test the size in case you don't have the actual batteries at hand.
You may have to print to holders at 101% size, as the fitting is very exact, and my experience is that the prints (at least PETG) run a tiny bit small after cooling down.
Print Settings
- Printer:
Bambu Labs X1C
- Rafts:No
- Supports:No
- Filament brand:
extrudr
- Filament color:
white
- Filament material:
PETG
Tags
License
Battery Pack holder 21700
by supzero is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
特斯拉 Mini 3 Pro 无线遥控自行车支架2023-03-26 -
复古风格闹钟架2023-03-26 -
3D打印 Hawkeye Thumb 2摄像头模型2024-03-21 -
尖峰装饰附件2024-04-04 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23 -
厨房水槽滤网过滤器2025-06-05 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
系带3D凉鞋（儿童款）2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24