黄色军事卡车移动版本

Yellow CRAM Military Truck with Movements

2023-09-09 02:09:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

There are three ways to print this.

As single piece:- Please download STL file but there wont be any movements.
Multiple Pieces :- Download 3mf fie with Full_dismantled.3mf. BEST QUALITY OUTPUT. Please use the 3mf file for assembly also.
Combined:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this. You may find a sample file ending with combined.3mf.

EASE OF PRINTING

This model contains parts of 5 colours - GREY, RED, YELLOW, BLACK & WHITE. I have seperated these into different plates according to colour and in the optimum print position. Please download the file "Print Plates According to Colour.zip" and extract to make use of them. There are total 12 plates with what colour to print in mentioned with the name. These plates can be opened in any slicer and printed according to your print profiles.

Movements Included

Dual Front Wheel Steering
Counter Rotating Back Wheels
Cabin Roof Hatch Openable
Tilt and Rotating Gun Mount
Extending Support Legs(4 in number)
Side Panel Doors Open

NOTE The tolerances to some elements are zero which has been intensionally provided to friction lock the elements while not in movements. You may have to fine tune the tolerance from your end using scaling funtion in slicer to ensure good fit without compromising movements.This also applies for the pins that make rotation possible between elements. Please proceed with printing all the pins after testing printing a pin and testing the fit of a joint. You should be able to find the adequate scaling factor with this.

Supports should be provided as required.

Appreciate the makes uploads.Open for suggestions.