可折叠三脚架灯具
Foldable tripod lamp using 16mm PVC pipe fittings
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I needed a low-intensity lamp for my nightly programming sessions. The structure is based on ⌀16mm PVC pipes you should be able to buy at your local hardware store, combined with custom designed 3D printed fittings. I wanted to keep it simple, so this lamp doesn't even have an on/off switch.
Even if you don't build this lamp entirely, I think the use of pipes and fittings can be useful to your projects as well. I would love to see what you guys make out of it.
Non-printable Bill of Materials (BOM)
For the tripod:
- 3x M4-15 bolts (as axis)
- 6x M4 nuts
For each of the 5 knobs:
- 1x M4-15 bolt
For the adjustable slider:
- 2x M4 bolt (one fastening the axis, the other one is introduced inside the slider)
For the spotlight head:
- 8x M2.3 self-perforating screws (4 holding the PCB, 4 fastening the enclosure)
- 3x white LED 5mm
- Vero-board (PCB with 0.1" (2.54mm) hole matrix)
- 1x 5.5mm DC "barrel" panel socket (female)
- 1x 5.5mm DC "barrel" jack (male)
- 5V power supply
Assembly instructions
For each knob: introduce the nut into the knob, then fasten it by screwing in its threaded lid.
PS: For the finished project, I've used @carlesoriol's cool DC jack enclosure
Tags
License
Foldable tripod lamp using 16mm PVC pipe fittings
by projazzka is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
Raspberry Pi Zero 外壳2023-05-27 -
Fondue skewer organizer2023-09-07 -
树桩2024-04-16 -
拳击手套帽2024-05-01 -
我对Ring的爱2024-05-05
最热下载
-
钥匙扣2023-03-26 -
远投笼2024-04-06 -
Woods Mower 30922 护盾保持者2024-04-24 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
线框无心2024-05-08
最新模型
-
定制曼达洛人头盔附带曲奇切割器2024-05-08 -
欢迎来到罗克维尔2024标志项链2024-05-06 -
第18款磁吸套（用于TF背部带子）2024-05-06 -
参数化设计的安全防护临时门锁插销2024-05-06 -
Jenga盒子2024-05-06