18毫米 Sputnik 1 模型火箭
18mm Sputnik 1 Model Rocket
2023-09-10 01:14:54
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is the 18mm version of my Sputnik series of model rockets.
To build this rocket you will need:
*a piece of 18mm (BT-20) body tube,
- kevlar cord for a shock cord
- 12" Parachute
- BBQ Skewers (the ones I used were around 4.3mm in diameter)
- 150mm of 1/4" dowel (optional, you can also print the "Stand Rod" part instead)
The motor tube should extend into the nose cone with a snug, but not tight fit. It should be snug enough that the body doesn't fall out on the launch pad, but lose enough that the parts will still separate with the ejection charge.
These rockets produce a loud "crack" at ejection, which is quite fun.
Video of maiden voyage: https://www.youtube.com/watch?v=f1OwPaf1kTo
License
CC BY
18mm Sputnik 1 Model Rocket
by Aslansmonkey is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Na Miata 240SX 原厂经典车型 + 后灯装饰插件2023-05-10 -
Schildkröte Line Tank2023-08-08 -
PGO BR200 验车速度传感器盒2023-08-09 -
JBL Partybox 310 3D脚垫橡胶脚侧用型号2023-09-09 -
自行车钥匙扣2024-01-05
最热下载
-
奥瑞图尔 Obsidian - Marlin 固件 PID 打印床解锁2023-03-26 -
GPD Win3 把手型号2023-04-07 -
Makita 10.8V 钻具与电池组2023-04-07 -
GTA 5 大地图模型2024-04-21 -
Halo Reach巴黎级大型战舰2024-05-05
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
罗技K400键盘壁挂式支架2025-07-27 -
HGX lite v2支架2025-07-18 -
丰满跪姿美熟女2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26