TurboBee 160RS顶部

TurboBee 160RS top

2023-09-10 01:54:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have an old iFlight TurboBee 160RS frame but I lost the original canopy. I have most of the other parts. I designed this top lid so I could fly this quad again.

Use M2 standoffs and mount the camera to them with a printed mount (if you don't have a file it looks like the front arms from this Thing will work: https://www.thingiverse.com/thing:4085863).

There is a hole cutout in the back for an SMA antenna mount. The fin is tall enough to protect a Foxeer Lollipop v3 antenna.

This frame is not sold anymore, so I don't think that it will be useful to too many people, but I wanted to share this file anyway.

Print Settings

Printer:
Tenlog TL-D3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament brand:
Inland
Filament color:
Gray
Filament material:
PLA+
Notes:
Nothing special needed. For best strength you can increase the number of walls, increase the thickness of the top/bottom, turn down your print cooling, and print at a little higher temp.