家庭版水果飞虱捕杀瓶盖3D模型
Simple Fruit Fly Trap Bottle Top
2023-09-10 06:35:21
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a simple fruit fly trap. Put a bit of bait in a pop/soda/wine/etc bottle 9red wine vinegar works really well), and then simply plane the trap in the bottle, pointing down (see photo).
The brim is wide enough that it should work with most small neck bottles.
Print Settings
- Printer brand:
Sovol 3D
- Printer:
Sovol SV06
- Rafts:No
- Supports:No
- Resolution:Doesn't matter
- Infill:Doesn't matter
- Filament brand:
Any
- Filament color:
Any
- Filament material:
Any - I used PLA
- Notes:
Easy to print, but you may want a brim to help with adhesion and prevent warping, depending on your printer and filament.
How I Designed This
Designed in Blender.
Tags
License
CC BY-NC
Simple Fruit Fly Trap Bottle Top
by madscica is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
面部线条设计2023-03-26 -
Movi Pro 21700 电池包2023-04-30 -
GUY AA 装甲车2024-01-05 -
Heroscape桥墙2024-01-10 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
GMX曲线支架支持GoPro安装（或轻型结构）2023-05-22 -
Dado - 立方体模型2024-03-24
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
HGX lite v2支架2025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
鞋撑2025-07-17