接地插座 - 端子 - 美国插座

Terminal Post Grounding Plug USA Outlet

2023-09-10 13:43:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

After seeing online that most people plug into a banana clip adapter (which I don't love) or they just plug directly into the wall (better but only a bit) to control static, I decided to build a simple terminal post grounding plug ESD adapter.

This is designed to be fairly secure and won't pop out easily like the banana clips do once they start to wear out. This also only costs a few cents and can be customized further without too much effort.

With a slight indentation to make removal easy and a single #10 machine screw (#10 UNC-24x1.25") and nut as the ground post and terminal connection, this is a great alternative to $8-$10 adapters seen with online retailers.

NOTE: Be careful with the prongs. I never had any break off in the wall, but I can see this happening. I printed enough wall layers to make the prongs solid (or use support blockers) and printed with them pointed up in the air. So far so good. Just be sure to push-in or pull-out directly without applying side-pressure. Also, ALWAYS USE CARE care when working with electricity.

As always, I have included the Blender file and I use Booleans to not be destructive. The other STL is my first modeling of the plug just in case that has any value to anyone.

The original model made as a reference has its own page here: https://www.thingiverse.com/thing:6214364