Nerf 命运巨型混搭版多弹药类型专用型号

Nerf Fate Mega XL Remix for Multi-Ammo Types

2023-09-10 14:41:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

*Update 9/27/23: added another version of the inline insert with a muzzle that can accept a worker scar or other 16mm attachment. I've also come to accept that the fate doesn't have quite the plunger volume for demolisher missles.

*Update 9/24/23: Created a new version of the insert that has space for 4 inline half darts or 2 full sized darts. I had to use smaller o-rings due to the rear being widened. This version uses a 60mm brass tube.

I really liked the Nerf Fate->Mega XL design, so I figured I'd go crazy with it.

-The muzzle diameter is slightly wider to make mega XL darts easier to load.
-The inner barrel has been tightened to accept mega darts.
-A slightly wider inner barrel section has been added that can accept rival rounds.
-I made an insert that fits inside the barrel that can take elite or half darts.
-The outside of the insert can accept demolisher missiles.
-You can shove a hyper round into the muzzle of the insert, if for some reason you use hyper.

The insert is held in using two 18x2.5mm o-rings. Printing with a brim is recommended.

There's three versions of the insert, one that can be used alone, one is sized for a 17/32 brass barrel, and one that has a 4 round inline clip. Cut the brass barrel a little short of the muzzle if you plan on sticking in hyper rounds.

The barrel lengths and diameters can probably be tweaked to optimize performance, but I haven't played with it much yet.

Hardware:
2x 18x2.5mm o-ring
1x 17/32 brass tube cut about 78-80mm (optional)

Hardware (inline):
2x 16x1.5mm o-ring
1x 17/32 brass tube cut about 60mm (optional)