自动转轮台

motorized Turn Table

2024-01-04 23:33:16

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here is my creation of a turn table.
I've made it to look nice, since you wanna use it to show off stuff!

Overall, the used components are only standard stuff, easy to find (see BOM).
I've also added a testing gear, so you can figure out the fitting on the ball bearing and eventually scale the top table for printing.

It uses an Adafruit Trinket (5V), the sketch is also included (pay attention to the comments). I've wired up the whole thing by soldering the wires on to the pins because I didn't have enough jumper cables at that point, but you can use jumper cables instead.
You only need to solder the header pins on to the Trinket and the wires onto the potentiometer.
Oh, and I recommend removing the LEDs on the driver board and cover the red LED on the Trinket.

Have fun building!