地面灯

Floor Lamp

2024-01-05 02:38:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This lamp has been designed for a 1-in-6 scale diorama. At the default scale, the upright is made from a metal drinking straw 6.0mm diameter - corresponding holes are 6.2mm diameter. There is provision for a 3V button cell (3032) holder inside the base.

Change the scale as required. Use clear / transparent / translucent material for the glass. For best results print using a resin printer. If using a filament printer, use 100% infill for the glass and at least 25% for the two bases. Use supports as required.

I spray-painted the bases using a gold rattle-can to match the existing upright.

For Illumination, use 5mm LEDs (with resistor) or cob LED strips. Run wires for the LED illumination through the upright tube and fit the battery holder in the base.

Consider adding weight at the bottom - i.e. washers or nuts.

The “assembly” models are provided as an assembly reference - avoid printing these.