抗压球挂钩（可容纳三个球）

Anti-Stress Ball holder for three balls

2024-01-05 07:08:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Couldn't find simple and clean looking anti-stress ball holder that could fit three at the same time so I designed one! No more rolling of the table and/or missing balls any more.

I also included 4 x spots for 10 x 3 mm neodymium magnets that can be push fit or glued in the holes for even more secure fit if you have magnetic surface to hold the holder on like I do.

Main features and specs:
– Fits best with balls that have diameter of around 65 mm. Feel free to scale up/down if needed
– Should have easy enough access to pick any of them at the time that you won't be likely to knock others out while doing so
– Able to include up to 4 of 10 x 3 mm magnets for more secure fit if you happen to have magnetic surface

Print Settings

Printer brand:
Geeetech
Printer:
Geeetech A10M
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
10-20%
Notes:
Printed with 2-3 perimeters for better rigidity and I personally included supports when printing as the holder is supposed to be used (magnet holes down) for better looking top surface and I accidentally included ironing for that extra clean top surface.

If you don't mind or you have textured plate you can also print it flipped.