Gutter Down Spout to Pipe Adapter
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Downspout to 4" pipe adapter broke, while these are inexpensive and readily available as a whole unit, replacing them in place seems to require disassembling the gutter downspout from the house so I can fit the replacement in place. After searching a bit I decided to just make my own adapter than can be easily fitted in place without needing to adjust the gutter.
The dimensions match the commercially available adapter, but this one is simply split in half with tabs that can be mated using 4 screws.
Just print two of these and you should be in all set.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:.2+
- Infill:25%
- Filament brand:
Inland
- Filament color:
White
- Filament material:
PETG
- Notes:
You might want to use a brim to help keep this adhered to the build plate. I let this run fast as it didn't need to be pretty, might have used a 1.0 nozzle to speed things up, but its been a while since I printed this and don't remember
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
Gillette吉列剃须刀架2025-07-14 -
Geeetech A10 DD Orbiter 2.4 E3dV62023-04-21 -
EDF 64mm叶片住房（内径：64/64.5/65mm）2023-09-08 -
原子鱼导弹型号MG7-A2024-04-11 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最热下载
-
Wolf系列手机支架2025-07-16 -
Arduino或5V继电器控制板固定架2024-04-02 -
浴室排水器2024-04-07 -
法兰尺寸测量工具（小）2025-07-16
最新模型
-
团队精神骷髅标志展示架2024-05-08 -
长方形型立体储物架2024-05-08 -
装饰风瓶2024-05-08 -
雨滴罩密封夹具套装（针对Scirocco MK1）2024-05-06 -
T 型支撑结构适配器2024-05-06