ENDER-3 V3 SE挤出器组件
Extruder Assembly ENDER-3 V3 SE
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
after making a couple of fan ducts my self never lined up with how i was making them
found the hot end just wasn't in correct spot
so after few months of printed decided to strip down for a clean and measured up as much as i could be modified ctyler2621 design could still be some tweaks to be had but this took half a day and the last dual duct i made is working ok so will revisit that later on or till it melts like the last one
also attached my 5015 dual duct front/back which does need tweaking as duct outlets sit a few mm towards the front hence the rear duct may melt
did end up tweaking touch sensor location at last minute so closer then it was also
Tags
相关内容
联系我们
热门推荐
-
海洋之滴 Boargame 天文仪室2024-03-21 -
原子鱼导弹型号MG7-A2024-04-11 -
雌性独眼巨人2024-04-17 -
Iris隔膜刀片非重叠参数化模型2024-04-18 -
Ender-3电源下部支架2024-04-22
最热下载
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
Flex Dino钥匙链2023-03-26 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
鞋带锁2025-07-17 -
坏龙家的大宝贝女生别下2025-06-26 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24