松下AU-EVA1型号KP1AUEVA1Z麦克风持有固定架

Panasonic AU-EVA1 1KP1AUEVA1Z Mic Holder Stay Unit

2024-01-05 17:34:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

松下AU-EVA1型号KP1AUEVA1Z麦克风持有固定架

松下AU-EVA1型号KP1AUEVA1Z麦克风持有固定架

Summary

Hello,
I was looking for a Replacement for the Panasonic AU-EVA1 "mic holder stay unit" (Part-Number 1KP1AUEVA1Z ) which cost ~80 EUR.

As I couldn't find one, I designed it myself. It looks a bit different than the authentic replacement part, but its a 100% fit.

The screw holes are 3.4mm in Diameter, so you can cut a thread M4 in it (like its on the original Part).

The decoupling from rumble and mechanical noise is ensured by the rubber bumpers on the Mic holder unit ( replacement part VYC1146 ) itself.

Print Settings

Printer brand:
Vivedino, Formbot
Printer:
Vivedino T-REX 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
12%
Filament brand:
Sunlu
Filament color:
black
Filament material:
PLA+
Notes:
flat surface to the bottom.
support essentially not necessary but recommended for "touching build plate".

Infill 12% is enough.
3 bottom/top layers.
2-3 wall layers.
0.2mm level height.
Printspeed 100%
215°C filament temp for PLA+.

Post-Printing

Cut M4 threads in. The Holes are 3.4mm so its just right for a cut straight into the printing Material.

How I Designed This

I took measurements for the Handle Unit ( 1KH1AUEVA1Z Joint on the the LCD hinge stay unit ( 9YE2AUEVA1Z ) and designed it in blender.

Tags

au-eva1 Microphone panasonic replacement part videocamera

License

CC BY-NC-SA

Panasonic AU-EVA1 1KP1AUEVA1Z Mic Holder Stay Unit
by sethaawingedneko is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

松下AU-EVA1型号KP1AUEVA1Z麦克风持有固定架

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型