Pocket FT8防尘盒
Box for Pocket FT8
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
It's a somewhat custom case for the Pocket FT8. It contains, in addition to the system, the power supply. It consists of 4 LiIon paralelipipedic batteries of 1Ah each and an electronic part from a power bank (it's from my junk box).
Print Settings
- Printer brand:
Prusa
- Printer:
Prusa Clone
- Supports:No
- Infill:10
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PLA
- Notes:
If the system will be used in the field, it is recommended not to use dark colors (the PLA filament black, in the sun, it can melt!).
Post-Printing
Small adjustments with a file are necessary
The box consists of two halves. Their assembly is done with the help of four 3 mm screws.The button is only for commands to the power board (test, flashlight).
License
Box for Pocket FT8
by yo8azq is licensed under the Creative Commons - Public Domain Dedication license.
相关内容
联系我们
热门推荐
-
ST150轮子螺母更换2023-05-01 -
Wörthersee 11cm Tester2023-05-13 -
刀剑守卫：Zenitsu2023-05-13 -
300毫升Marinelli型号试管，适用于Radex Obsidian2024-04-04 -
抗压模型2024-04-17
最热下载
-
E3D火山喷嘴2023-05-26 -
Metabo SXE450 真空连接器（适用于Bosch Advanced VAC20）2024-01-11 -
Dado - 立方体模型2024-03-24 -
Apple鼠标 - M0100 3D模型2024-03-25 -
GTA 5 大地图模型2024-04-21
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
高跟鞋鞋架2025-07-17 -
比基尼模型2025-07-16 -
裸女站立2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26