文恩图谜题

Venn Puzzle

2024-01-06 11:13:03

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Simple three-piece Venn Puzzle. Print the part (VennPiece) three times, then put it together to create the sphere, which you can store in the box.

This is quite a challenging puzzle to construct. The protos are from a print I created on a Raise 3D E2 with a 0.6 mm nozzle, 0.15 mm layer height for high quality. Once printed, it helps to file/smooth the sharp tips so they do not have any burrs. You must position the corners very precisely for the three pieces to fit together.

Search for "Venn Puzzle" to find the solution and see how it works.

https://youtu.be/bO4qPWMMAiY?si=zeuwDVYKJAXoYxwl

Have fun!

Print Settings

Printer brand:
Raise3D
Printer:
N2
Resolution:
0.6 mm, 0.15 layer height
Infill:
25%
Filament brand:
Sun
Filament material:
PLA+
Notes:
On Raise 3D E2, supports only needed up to 55 degree overhang.

Post-Printing

File the two sharp corners to ensure they are smooth. Not much is needed, but the fit requires sub-mm accuracy.

How I Designed This

I purchased a metal Venn Puzzle from Craighill, then designed my own in Fusion 360 by slicing a sphere using 8 planes that I figured out from looking at the original puzzle. Each plane is offset 0.15 mm to allow for the fit.