推力主管 T.16000m Z 轴传感器模块
Thrustmaster T.16000m Z-Axis Sensor Mod
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I redesigned this because the original design didn't leave much space for the wires on my particular printer and another remix that used a channel for the wires ended up being too loose to support the sensor when the wires moved inside the joystick.
This version completely replaces the base, utilizes part of the original's stem, and completely reuses the top portion that houses the magnets.
This is a Work In Progress. The base was a little bit loose on my test unit, so the wires tended to push it off while reassembling. The top portion also wobbles a bit on the stem.
If this works for you, please let me know. If not, let me know the issue so that I may redesign it.
Parts required:
- 1 x A1324LUA-T hall effect sensor
- 2 x 5x2mm N52 magnets
Original Design: https://www.thingiverse.com/thing:5193814/files
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.12mm
- Infill:30-40%
- Filament brand:
Polymaker PLA Pro
- Filament color:
Black
- Filament material:
PLA Pro
- Notes:
- I used tree supports only for the bottom.
- No supports are needed within the center hole.
- Print slower than usual for better results.
Tags
License
Thrustmaster T.16000m Z-Axis Sensor Mod
by wrexti is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Dew Shield for Evoguide 50ED2023-08-07 -
Schildkröte Line Tank2023-08-08 -
老板螃蟹 KGC-0102023-09-08 -
空气软枪缓冲管板 (AEG, 后置连接木制部件)2024-01-03 -
Arduino继电器模块外壳2024-01-14
最热下载
-
车身RC 1/10 全套2023-03-26 -
斯坦利杯2024-01-11 -
硫化机模型2024-04-13 -
Ikea 米兹顿 插嵌2024-04-20 -
GTA 5 大地图模型2024-04-21
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
天使和恶魔2025-07-16 -
私密羞羞娱乐骰子2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
