Ender 3 Max 带轮子驱动 Bowden 导管改装

Ender 3 Max belt driven bowden mod

2024-01-06 17:39:46

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Seek solution for Belt driven Ender 3 Max bowden but not found satisfied one for me, so I start to use my brute design skill to do what I can to do :) Forgive me if the design seems rather not clean.. but for me the function that matters.
Im Edit bottom part using 20T idler one
Include here only Left gantry part and bottoim one, other part can refer to original and or other remix one ( I use remix one on top part)

How I Designed This

I open original left bowden gantry plate in Edit mode and extrude the horizontal plate(vertically print). Add a copy of elbow to strengthen the plate. Make hole on belt path and add some hole for Filament sensor unit. Put also other hole according to stock plate, but not the long / tube hole, I replace it with 2 hole.. it is already enough for me :)
For bottom parts I slightly increase space on the legs as original one hard to push pin ( I found exact measure one) in also add side hole to screw in to bottom profile (see photo)
So there is 5 hole but I only use 4
For other side bottom just mirror the part, maybe just messed text that says "up" but no prblem with that :P

Ender 3 Max 带轮子驱动 Bowden 导管改装

朋友，你觉得上面这个模型，属于下面的哪个分类？