三脚架

Tripod

2024-01-06 19:48:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have designed a camera tripod with 1/4" mount. I tested it with a load of approx. 4 kg.
When unfolded, the radius is approx. 25-30 cm with a height of 15 cm, so that the camera is stable and dry on grass, for example. When folded up, the radius is 10 cm and the height is 25 cm.
In order not to be overlooked at night, six 5mm LEDs light up in every direction. I used RGB, but white LEDs are also powered by 3V and can be operated with a CR0232 battery without the need to solder in resistors.
It has a guide for a rubber band for transportation and holes for carabiners.
On the top are three 5x5mm recesses for magnets to hold camera equitment.

Have fun with the design, if you have any suggestions for improvement, please write them in the comments.