小型摄像机专用折叠三脚架（可打印腿基）

Mini Tripod for small cameras (with print-in-place foldable legbase)

2024-01-07 01:04:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Mini tripod for your small camera - can recommend it for up to 500 gramms. Tested with 800 gramms as seen in the pictures.

The base is print-in-place, has 3 foldable legs to stay compact and sturdy when stored or carried. The adapter has to be glued on top of the base. There are two versions of it: centered and offset. This way you can find the most stable position for your own camera.

Dimensions (fully open):
-legbase height: 5cm
-total height: 7cm
-leg spread: 7cm

Print Settings

Resolution:
0.25
Infill:
30
Filament brand:
Sunlu
Filament material:
PLA
Notes:
I printed the base with skirts and no supports. The adapter needs only the bed contacting support.

Post-Printing

The base may needs a little TLC to free the legs at first but once you fold them out there should be no problems with movement.
For gluing the adapter to the base I used regular superglue. Just make sure you fold the legs out and don't get any glue on the joints. ;)