HobbyWing Max6 G2 40毫米风扇罩
HobbyWing Max6 G2 40mm Fan Shroud
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I have seen it requested in a few places, so here it is, the HobbyWing Max 6 G2 40mm fan shroud for installing aftermarket fans with more air flow. Enjoy!
What you need:
(4) M3 brass inserts
(4) M3x35mm screws
Soldering iron to get brass inserts set into the holes
Print upside down (fan opening on the build plate) with supports.
Use the original M3 screws to remount to your ESC.
Use M3 brass threaded inserts in the 4 fan holes (the ones NOT recessed).
Use M3x35mm screws to mount fan.
Print Settings
- Rafts:No
- Supports:Yes
- Resolution:.2
- Infill:15
- Filament brand:
ANY
- Filament color:
ANY
- Filament material:
ANY
- Notes:
Print upside down (fan opening on the build plate) with supports.
Use the original M3 screws to remount to your ESC.
Use M3 brass threaded inserts in the 4 fan holes (the ones NOT recessed).
Use M3x35mm screws to mount fan.
Tags
相关内容
猜你喜欢
联系我们
热门推荐
-
快乐之城：Grozilla插入模型2024-01-17 -
Tyco 4-6-0型号壁炉烟囱滤管及火车水箱顶部组件2024-01-19 -
3D模型：肩部按钮模块V0.1B2024-03-25 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24 -
相对而言很小的小矮人齐柏林飞艇2024-05-05
最热下载
-
车身RC 1/10 全套2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
鞋撑2025-07-17 -
比基尼模型2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16 -
苍井空老师全身像苍井空跪姿2025-06-27