Golf 7.5型底壳螺母
Golf 7.5 - Underbody Nut
2024-01-07 12:19:26
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix on the v7 nut by boghonk
I found that the v7 was not wide enough at the base to secure the underbody of a 2020 Golf R.
This version has a small change of a 30mm base. This will allow you to secure the nut into the base panel of the underbody.
The 10mm hex head remains. Print in whatever filament you believe suitable. I've printed temporarily in PLA with no issues.
INSTALLATION - Carefully start threading the nut onto the stud by hand and then slowly thread on and back until the thread is cut into the plastic. Then secure the nut into the underbody and install as normal.
Print Settings
- Printer brand:
Anet
- Printer:
A6
- Rafts:Yes
- Supports:Doesn't Matter
- Infill:50%
- Filament brand:
3D Fillies
- Filament material:
PLA
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
![Gormaw - 无限冒险合作版 - 28-32毫米游戏模型 [免费支持版]](https://www.3dsjs.cn/api/utils/resourcehub?time=1756030263&url=http%3A%2F%2Flocalhost%3A9898%2Fsandsjs%2Fimage%2F3%2F8%2F38a910af2b7eb09b19e0130d93e771f4.webp&signature=6273bbaf7a3cd9e9b1a7bab027be5487)
联系我们
邮箱: 289047960@qq.com
热门推荐
-
8.6毫米黑暗模式，口袋快扣模块弹药盒2023-03-26 -
耳机架2023-08-08 -
精密1/24比例RC雪猫车身模型2024-01-17 -
Brita 水滴型阀门插入部件 3D 模型2024-03-22
最热下载
-
Fillenium Malcon 3D模型打印解决方案，星球大战飞船2023-03-26 -
斯坦利杯2024-01-11 -
Articulated Snake2024-03-30 -
Philips 马拉松 FC9225 轮子 飞利浦 Marathon FC9225 轮子2024-03-31
最新模型
-
Broncolor Pulso G缩放旋钮2024-05-08 -
新邻居你好！2024-05-08 -
劳拉的基础模型2024-05-08 -
太阳能板支架2024-05-06
