TBG空气挂架，用于Alfawise U20/U30型号，更长版本LK。

TBG Air Mount for Alfawise U20 U30 Longer LK

2024-01-07 15:26:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Plate for installing TBG-AIR.
Allows you to remove the extruder without removing the carriage.
You can use additional fasteners on the original carriage bosses, but you will have to remove the motor from the extruder.
Required hardware:
Plate connection: din912 m3 8mm -4pcs
nut M3 -3pcs
Fastening to the carriage: din912 m3 6-7mm -3pcs (You need to take 8mm screws and file it a little)
Connection of plate and extruder: din7991 or din965 m4 8mm-2pcs
The holes are covered with membranes for printing without supports
The original was taken from Google drive from the official Trianglelab Store page on aliexpress:https://aliexpress.ru/item/1005005666437316.html?sku_id=12000033948548676
https://drive.google.com/drive/folders/10oaf_JKIFIPbKWLJnUDA1cEeA0Clbekh?usp=drive_link