绳匣（适用于2公斤绳子）
Spool holder (suitable for 2Kg spools)
2024-01-07 18:48:28
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a replacement spool holder that can be used with the original Ender 3 spool nut.
It is extended respect the stock spool holder in order to accomodate 2Kg spools.
I printed in vertical position, which needs supports.
I may re-design a new version for printing in horizontal position minimizing supports.
You can check also my alternative design with bearing inserts: https://www.thingiverse.com/thing:6418701
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:Yes
- Resolution:any
- Infill:suggested higher than 40% for better strenght
- Filament brand:
any
- Filament color:
any
- Filament material:
PLA or higher
Post-Printing
Post printing suggestions
After the print just remove the support, clean the support interfaces and i suggest to put a little soap in the grooves to facilitate screwing the nut the first time.
How I Designed This
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
压缩袋真空适配器2023-03-27 -
Dew Shield for Evoguide 50ED2023-08-07 -
老板螃蟹 KGC-0102023-09-08 -
自行车钥匙扣2024-01-05 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
奥瑞图尔 Obsidian - Marlin 固件 PID 打印床解锁2023-03-26 -
Extra 330LX型RC飞机翼固定架（Multiplex）2023-05-23 -
佳能EOS镜头连接接口2024-01-11 -
天眼6x30寻星器引导摄像头M42适配器2024-03-20 -
Ikea 米兹顿 插嵌2024-04-20
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
网眼透风拖凉鞋赤足鞋凉鞋2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
Yeezy Foam Runner Adidas运动鞋2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16