电动桌子遥控器挂钩

Electric desk remote holder.

2024-01-07 18:48:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Boring context: I rearrange my bedroom 1-4 times a year and since I want to have my bed next to my desk, it can be a problem depending on which way I arrange since the bed's side fluctuates. Because of the bed location, and the fact that I don't want to drill my expensive electric desk full of holes (which already has two for the door remote), I want to situate the remote and a power strip (which is for headphones, phone, and smartwatch recharger, for which I already made a solution here insert link when it's uploaded) on the side my bed is on.

Solution for this problem: a rudimentary clip-on system that needs only two-sided tape. Print 1 plate and 2 bases, tape the plate on the remote and two bases on opposite sides of the table and voila, now if I change the bed's side, all I need to do is unclip the remote from one side and clip it on the other. As mentioned in the context, I have also made an extremely simple system for my power strip, which is found here: insert link, again.

The printing itself is simple. Use whatever filament you want, you can also scale it, however, I'd stray away from shrinking it, as it is already extremely small and decreasing size might mess up the ramp that locks the plate. No supports needed, just flip the base 180 and you're good to go.

!!!! NOTE: the design's clip retention is based on the thickness of your tape, thicker tape means you can bend the release clip further upwards for easier detaching. If your tape is is as thin as paper, it won't work as the clip doesn't have any room to move upwards. I'm using 1mm thick tape.

!!!! NOTE 2: it's the dimensions of the plates that it taped to the remote are based on mine, which is X 45.65mm and Y 45mm. As common sense usage allows, you can use this to mount other thing too, not just a remote for your desk.