牙刷夹持器
Simple toothbrush holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Simple soap tray that clips onto your shower tube. It's made for a 16 mm tube. But you can scale it to suit your needs in your slicer.
In order to scale measure the diameter, in mm, of your own shower tube then divide it by 16 and use the answer as the scale factor of the print.
Ex: your tube has a diameter of 20mm => 20/16= 1.25 where 1.25 is the scale factor of the print.
It should be a tight fit in order for it to clamp securely on shower pole.
Print with relativly high infill and add few extra walls.
Post-Printing
As the fit is quite tight you may want to deburr where the two piece join
Tags
License
Simple toothbrush holder
by eightbinks is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
热门推荐
-
卡片存放盒2023-04-27 -
摄像头旋转装置用于飞行伞摄影2023-05-24 -
Z Fold 4 摄像头边框2023-08-07 -
Uberti 大西部II型单动手枪手柄2024-03-23 -
F1 概念车3（2011）2024-05-05
最热下载
-
Fillenium Malcon 3D模型打印解决方案，星球大战飞船2023-03-26 -
罗宾：不公正22024-04-07 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
F1赛船3D模型固定文件2024-05-08
最新模型
-
唇膏/润唇膏盒带卡片插槽2024-05-08 -
MW4 Madcat MKII 3D模型2024-05-08 -
沙箱建筑模型2024-05-08 -
2x4工作台2024-05-08 -
Makita DDF484钻孔架 / 钻孔机支撑架2024-05-06