Tactical Flashlight Dummy
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A simple tactical flashlight dummy with mount for picatinny rails and a dummy pressure switch. Made to make your airsoft gun look "tacticool", even if your country forbids you to real have target illumination devices (like flashlights and laser pointers).
Materials needed:
- 2 M4 heated inserts (optional)
- 2 M4x15 screws (optional, can be a bit shorter)
- 1 M4x35 screw (I cut a longer one to length)
- 1 M4 Nut
- Fitting cable for pressure switch (for example an old USB cable)
- Glue
Attaching the pressure switch is optional, the end for the cable on the flashlight dummy is a separate part.
Before you print the pressure switch scale it up to around 150% size for best results!
Print all parts except the cable end and the pressure switch with supports. The dummy itself prints the best if placed vertically with the cone as the bottom.
Happy printing and tinkering!
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:50
Post-Printing
Assembly, Method 1: Glue
You can use glue to attach the dummy to the mount.
If you want to attach the pressure switch glue the printed cable end part to the back of the dummy.
Put a drop of hot glue in each of the holes on the cable end and the pressure switch to glue the cable in place.
To attach the pressure switch to your airsoft gun you can use double sided tape or velcro tape if you don't want it permanently fixed.
Slide the dummy assembly onto your pic-rail and secure it with the longer M4 screw and the nut.
Assembly, Method 2: Heated Inserts
If you want to mount the dummy to the pic-rail mount a bit more robust or make the dummy removable from the mount you can use this method.
Melt the two M4 heated inserts in the pre-existing holes in the dummy. Afterwards screw the mount to the dummy with the two M4x15 screws.
If you want to attach the pressure switch glue the printed cable end part to the back of the dummy.
Put a drop of hot glue in each of the holes on the cable end and the pressure switch to glue the cable in place.
To attach the pressure switch to your airsoft gun you can use double sided tape or velcro tape if you don't want it permanently fixed.
Slide the dummy assembly onto your pic-rail and secure it with the longer M4 screw and the nut.
Tags
License
Tactical Flashlight Dummy
by SkyKeepr is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
星球大战3D棋盘模型：MrBaddeleys国际象棋棋子50%比例展示2023-08-24 -
Lian Li O11 Vision LCD Holder Sensor Panel2024-04-07 -
MX-1000三脚架快速释放装置2024-04-09 -
Ender-3电源下部支架2024-04-22 -
代莫斯面罩——来自彩虹六号：围城2024-05-04
最热下载
-
Valorant 杰特的姿态2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Flex Dino钥匙链2023-03-26 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
女式凉鞋2025-07-16 -
艺术雕像（女性）2025-07-16 -
裸女站立2025-07-16 -
坏龙家的大宝贝女生别下2025-06-26
