[重构版]RG纳米案例加固版
[Remix] RG Nano Case Thicker
2024-01-08 08:02:39
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan![[重构版]RG纳米案例加固版](https://www.3dsjs.cn/api/utils/resourcehub?time=1753431583&url=http%3A%2F%2Flocalhost%3A9898%2Fsandsjs%2Fimage%2Fa%2F2%2Fa2073d33140973b78fcfc5f63d9cf910.jpg&signature=98866dfbb7e02e5e6152b2dc7a2bf29f)
![[重构版]RG纳米案例加固版](https://www.3dsjs.cn/api/utils/resourcehub?time=1753431583&url=http%3A%2F%2Flocalhost%3A9898%2Fsandsjs%2Fimage%2F5%2Fd%2F5d89e02495703ac022d6a0cf43d29d0d.jpg&signature=3ad04e345dd968c7a8d7078d5998cbe6)
Summary
I had the side of the original case break in my backpack so I thought I'd quickly alter the model to be just a little bit thicker (with some adjusted tolerances too). However, having thicker edges does mean that the case is harder to snap on, so I'm not sure if the trade-off was worth it...
Now I'm kinda tempted to make a new design that avoids the whole thin, easily-snappable brackets.
Tags
License
CC BY-NC
[Remix] RG Nano Case Thicker
by InventorIan is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
RC飞机无人机3D打印部件2024-04-15 -
排球饼干切割模具2024-05-03 -
泡泡底拖鞋2025-07-17 -
性感美女3d人像（带基座）2025-07-17
最热下载
-
鸡蛋绘画机迷你（Eggbot衍生版）v1.12025-07-16 -
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
Arduino或5V继电器控制板固定架2024-04-02 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21
最新模型
-
海豚鱼饼干模具2024-05-08 -
3.5寸硬盘驱动器到四个2.5寸硬盘驱动器适配器（Nox Hummer Spark）2024-05-08 -
戴森V6 V7吸尘器软垫条端盖2024-05-08 -
疯狂的宅邸：火之符2024-05-08 -
拉斯科管道支架配件带螺丝孔2024-05-06