1/18比例拖车3D模型

1/18 scale trailer

2024-01-08 11:40:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

trailer designed to haul other 1/18 scale vehicles. I left the hitch open to use either a small jewelry eyelet or can be drilled larger and use a heim joint eyelet like the injora trailer. Uses 606 bearings for the wheel bearings. Everything glues together, some parts may require filing for fitment. Ramp brackets glue under the trailer, ramps store underneath. The random piece with 4 points is used to lock the ramps so they don't fall out(see pictures). uses standard 56mm tires, I doubt larger wheels will clear the fenders. fenders glue in place after wheels are installed, as there's no centering marks for installing fenders. you should be able to assemble from the pictures provided. Its a work in progress, leave feedback and I can make adjustments.

Larger printers, download fenders and hubs, and whole trailer.
Smaller printers, download fenders and hubs, rails, ramps, trailer deck, tongue

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Plus
Supports:
No
Infill:
15-40%
Notes:
requires 4x 606 bearings
1.5mm drill bit(drill out hubs)
4x 2x10mm screws(for wheels)