Tenlog电源适配器

Adapter for Tenlog power supply

2024-01-08 20:24:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I wanted to swap my original 360W Tenlog TL-D3 Pro power supply for a 600W power supply, but I quickly realized that the mounting points didn't fit. The original Tenlog power supply is half as flat as my new power supply.
So I simply created "adapters" and was then able to screw the new power supply onto the old mounting points.
M4 screws are used, I used the ones with a round head and a hexagon socket. the original screws on the outside.

You may want to screw the screws into the printed parts before installation as they go in a bit tight.

There is a large and small version, I actually only created the small one to test whether the holes fit, I left it installed straight away