Makita圆形电动锯尘袋
Makita circular saw dust bag.
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Makita circular saw dust bag.Prints easily with no supports.
A working piece i used 80% in fill.
You will need a reasonably long cable tie unfortunately I just grabbed one which was not in a packet so I can't tell you what size i used but there are many sizes which can fit this slot.
You will need a small child sock aged around 5.
To hold the sock in place I used some double-sided velcro wire elastic band or tape would all suffice.
I had two cut some wood in a house which temporarily had no electricity this worked well if anything was wrong, it worked too well I had to keep on emptying the sock.
Upside to this was the air was not full of dust and i did not have to hoover very much up.
Tags
License
Makita circular saw dust bag.
by Mervyn3D is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
低多边形皮卡丘 - 多孔和双孔挤出版本2023-03-26 -
可定制球体在笼中呈现独特设计2023-03-26 -
WaS_UK_S级驱逐舰2023-05-14 -
隐身高能量微波卫星概念2024-01-17 -
blink门铃钥匙2024-05-08
最热下载
-
GPD Win3 把手型号2023-04-07 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
智能骰子滚动器2024-01-06 -
Logitech G604鼠标扫描数据与橡胶替换2024-04-08 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
3D 打印遥控刷式喷气推进船（喷气船）2025-09-15 -
高跟鞋鞋架2025-07-17 -
鞋带锁2025-07-17 -
艺术雕像（女性）2025-07-16
