Makita指导轨持有器

Makita Guidrail holder

2024-05-03 01:35:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Download full version from Maker World:https://makerworld.com/en/models/213217

Makita guide stop, print it twice, and the hassle of measuring and aligning is over! Set it once and bring it to position.

The head of the stop can be easily hooked from the top and holds securely; there is no wobbling or slipping, eliminating the need for annoying screwing as with others.

For the adjustment slide, an M6 press-in thread is required. Simply press it in and adjust the desired measurements with an M6 screw and you're good to go.

The advantage is that the tape measure is attached from the top onto the stop, and the locking screw on the side secures it, ensuring that the tape measure does not get scratched and can be used indefinitely