玩具重力刀（无需硬件）

Toy Gravity Knife (No Hardware Needed)

2024-01-09 01:04:12

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a toy gravity knife I designed. It is fully 3D-printed and requires no hardware or glue to make.

You can learn more about the switch mechanism on this knife here.
https://www.thingiverse.com/thing:6403185

You can find my other toy knife designs here.
https://www.thingiverse.com/owentf/collections/39890750/things

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Resolution:
0.1 mm
Infill:
100%
Filament brand:
Polymaker
Filament material:
PLA PRO
Notes:
The only part that may need support is the handle. If you have problems with adhesion and overhangs I would suggest printing the "with supports" versions of the STL files.

Printing Orientation

Instructions for Assembly

The following videos show how to assemble the knife.
When assembling the knife it is important to note the orientation of the flexing slider. Its sides are slanted so it only works in a specific orientation which can be seen best in the animation.
I would strongly suggest using a lubricant on the flexing slider. It will work without lubricant but its action is much smoother when lubricated.

Tags

3D printing fidget Fidget Toy gravity knife knife knives mechanical mechanical toy Mechanical Toys mechanism toy

License

CC BY-NC-SA

Toy Gravity Knife (No Hardware Needed)
by OwenTF is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

玩具重力刀（无需硬件）

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）
2023-03-26
安益卡通 i3 迷你 HGX 轻量挤出器
2024-04-21
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程
2024-05-02
螺旋锥形手玩具（全新）
2024-05-08
厨房水槽滤网过滤器
2025-06-05

最新模型