轨道器与飞行熊猫6号

Orbiter on Flying Bear Ghost 6

2024-01-09 03:29:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I based this work over the good job from “Stimulus_for_life”, modified the position of anchor screws to the base which were not exactly in the right position, and giving space for a FYSETC usb ADXL (cutted to the real size) card.

I share both STEP and STL file formats. Remember STEP gives better quality when printing, and you could use it to modify the design at your needs.

Your opinions are appreciated.

Print Settings

Printer brand:
Flying Bear
Printer:
Ghost 6
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.12
Infill:
25%
Filament brand:
Sunlu
Filament color:
Gold
Filament material:
ABS
Notes:
Nozzle 0.4mm
It should work great with resolution of 0.2mm
- 5 top shell layers
- 4 bottom shell layers
- Brim if you need it

Post-Printing

Material Needed

PTFE tube, 63mm
Brass Insert Nuts 2 x M3 (Length 3mm, Outer Diameter 4.2mm) for the ADXL support
Brass Insert Nuts 4 x M3 (L 5.7mm, OD 4.6) two for the anchorage to the base plate, and two for assembling the extruder to the support piece.
Screws 2 x M3 (L4) for the ADXL support
Screws 4 x M3 (L8) for both the anchorage and assembling

How I Designed This

Changes to the original

I based this work over the good job from “Stimulus_for life”, modified the position of anchor screws to the base which were not exactly in the right position, and giving space for a FYSETC usb ADXL (cutted to the real size) card.