按钮式洗涤剂喷射器管子适配器

Push Button Detergent Dispenser Hose Adapter

2024-01-09 10:47:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Love those large push button liquid detergent bottle but hate the cups? Finding it hard or annoying to hold the jug while pressing the button to dispense the detergent?

Well I felt the same way and I wanted something easier. The first thought was to just attach a hose to the end of the push button nozzle. But that has a lot of dripping issues. So I came up with this design instead.

The idea is simple. Replace the cap with the push button nozzle with one that can have a hose barb attached instead. Then, put the push button cap onto the receiver that also has a barb fitting on it. Then with a couple of hose clamps (zip ties) and your ready to go.

This is still a WIP. I still dont have the threads perfect enough to prevent leaks without using large amounts of Teflon tape or some other gap filler. Use at your own risk.

Ive also designed and included some 1/4mip to 3/8th barb fittings. You are better off purchasing some Nylone ones from the store. But that sort of defeats the purpose of the 3D Printer.

Ill get some good pictures of it once ive finished the next revision. Feel free to make your own modifications.