16.5mm燃油喷射器主体插头适用于Subaru NA / WRX型号Bosch EV喷射器口（17mm接口）
16.5mm fuel injector boss plugs for Subaru NA / WRX Bosch EV injector pocket (17mm pocket)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
These plastic plugs are made to fit down into the Bosch EV injector pocket for Subaru manifolds. They are a touch loose so you don't get hard plastic shavings from jamming them in. Tape over to secure them if needed.
These are a first version release and are just a little oblong in fitment. If you don't trust tape and want to fill the hole with something, then these are cheap and easy with local 3D printing.
Settings used:
Anycubic Mega X with direct drive mod.
ASA filament
1mm nozzle
50% infill
All 4 should print in about 45m-1hr on 35mm/s.
Print Settings
- Printer brand:
Anycubic
- Printer:
i3 Mega X
- Rafts:No
- Supports:No
- Infill:50
- Filament brand:
Polymaker
- Filament color:
any
- Filament material:
ASA
How I Designed This
Basic cylinders in TinkerCAD.
This took maybe 5 minutes combining a flatter 3mm x 25mm tall cylinder and a 16.5 x 17mm tall cylinder.
相关内容
猜你喜欢
联系我们
热门推荐
-
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
快乐之城：Grozilla插入模型2024-01-17 -
藏身载具：VKB战斗者装备2024-03-18 -
3D模型：肩部按钮模块V0.1B2024-03-25 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24
最热下载
-
Valorant 杰特的姿态2023-03-26 -
车身RC 1/10 全套2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
Dado - 立方体模型2024-03-24 -
沙箱建筑模型2024-05-08
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
罗技K400键盘壁挂式支架2025-07-27 -
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
弹弓HGX-FRAME V1A2025-07-18 -
苍井空老师全身像苍井空跪姿2025-06-27