钩球类胶带测距回收装置

Disc golf tape measure retriever

2024-01-09 11:16:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this to retrieve discs off dangerously thin ice. It slips onto the hook part of the tape measure allowing it to slide over the top of a disc and then grab the back side to pull it back to shore.

There are two designs, one with side reinforcements (V2) and one without (V1). The one with reinforcements is more durable and should hold up better kept in a bag with other disc golf equipment. These both fit a Kobalt (Lowe's home improvement store house brand) 35 foot tape measure, and will likely fit others. You can modify the files on Tinkercad if you find the hook gap doesn't fit your tape measure. I found that gluing a weight to the retriever helped with stability when extending the tape across the ice, especially when it's windy.

I've printed these in ABS, PLA, and TPU. The TPU version doesn't hold on very well and needs a binder clip to stay attached, but the flexible nature does keep it from snapping if it gets crushed in your bag.

The models are available at Tinkercad
https://www.tinkercad.com/things/bf3qKKlT7Uz-tape-measure-retriever-v1
https://www.tinkercad.com/things/96tSKFLtmUS-tape-measure-retriever-v2

Print Settings

Notes:
V1 can be printed without supports. I recommend using a brim if printing in ABS.

V2 should be printed with supports, the brim is probably not necessary.