测距仪水平仪 V24（1英寸/30毫米/34毫米）

Scope Level v24 (1in, 30mm, 34mm)

2024-04-20 08:20:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I refined my scope level and made it available in 1 inch, 30mm, and 34mm. It is now less bulky but still robust enough to not have to worry about it getting damaged. Offset screw alignment allows for easy installation while maintaining a small foot print.

Hardware needed
Bubble level 8mm x 23mm
https://a.co/d/gnJVXwu

Screws M4x10mm
Heat insert 4x4x6

Print Settings

Printer brand:
FlashForge
Printer:
Adventurer 5M Pro
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
0
Filament brand:
COEX3D
Filament color:
Black
Filament material:
ASA
Notes:
I printed this in ASA with a .6 nozzle 4 walls 4 top and bottom and no infill. For ASA I used a up scale factor of 0.6% and everything fit snug. Some glue can be used to secure the level vial but mine printed tight enough I could press the vial in and it seems to stay put. If it does come loose a dab of super glue should do the trick.